The Finest Of Industrial Welding Equipment Under One Roof

The finest of industrial welding equipment under one roof

by

Carlos riplegs

Ripleg is an spanish company specialized in a lot of processes related with industrial designs and implementation of those designs, and electrical wires as well. As a part of implementing industrial designs, Ripleg is a company specialized in MIG / MAG and TIG welding. There are many different types of welding, but we are going to explain what is welding about. The welding is a process that allow two metals to melt together and being mixed in only once piece thanks to hot or pressure or both together. It is optional to use a third metal which melts at a lower temperature. We are going to explain the most common types:

– Electric corona: Union between metals is made by the hot generated by an electric arch with or without pression and additional metal. Electric energy is transformed into thermical energy, reaching upto 4000 C. We can tell many advantages of these kind of welding: Power source is cheap, can be used in any position, can be applied in most of the metals. However, it is a manual process.

– MIG / MAG welding: Can be semi-automatic, automatic or robotized. MIG / MAG stands for Metal Inert Gas / Metal Active Gas. MIG works with inert gas (Ar and He) and nonferrous metals while MAG works with active gas (CO2 and O2) and ferrous metals. It provides excellent quality products in almost every metal type. It is used for metals wider than 0.6mm. Can be used in every position. However, equipment required for MIG/MAG is complex and expensive. It provides fast work process.

– TIG welding: TIG stands for (Tungsten Inert Gas) and it is used by professionals with the device that applies hot and one metal on the other hand. It is manual, so it requires good skills from person in charge of welding. Can be used in all kinds of materials and positions. This kind of welding is more safer and resistant than others. It does not makes steam and final product looks like fine. It is very sensible to wind. Welding quality depends on equipment configuration. Using pure Helio allows an advance up to 30% faster than pure Argon atmosphere.

Comparing differences between MIG/MAG and

soldadura tig

for pieces of 4,2mm, MIG/MAG requires 160A while TIG requires 225A, so there s a big difference supposing that team speed advance is the same regardless welding type. It could be around 10 per day.

In every welding type considered in these article (MIG/MAG and TIG) there are limitations of metals that can not be melted; for example those with longitudinal deformation greater than 2,5%.

In addition, before welding process worker, should clean borders (paintings, humidity ). In addition, welding process must be performed in a place with no wind, rain and cold (work must be stopped when achieving 0 C).

If you want to hire the best professionals when it comes to welding, please contact with Ripleg at www.ripleg.es, and there you ll find a contact form that will allow you to get access to these team.

Carlos riplegs is a content writer for ripleg.es. He writes content about

soldadura tig

.

Article Source:

ArticleRich.com